Buy Stratton 26kW Generator with Dual 200 Amp Online
Buy Stratton 26kW Generator with Dual 200 Amp Online is the most powerful air-cooled standby generator available and has the longest, most comprehensive standard warranty in the industry. Briggs and Stratton’s PowerProtect Series has a sleek and appealing design with tool-less accessibility to all major components for routine maintenance.
More powerful than the competition, Briggs and Stratton rates the air-cooled standby at 26kW for LP Propane and 24kW for Natural Gas. PowerProtect Series generators install just 18 inches from your home, taking up less space and fitting into your landscape.
The Briggs & Stratton 40679 includes Dual 200 Amp/Split 400 Amp Automatic Transfer Switch for installation on a 400-Amp or 300-Amp service with two main circuit breaker panels. Add an optional power management system (see below) for whole house power management.
Briggs and Stratton 26kW Generator
The Briggs and Stratton 26kW Generator has a 993 cc V-Twin OHV Vanguard commercial-grade engine equipped with Low Oil Shutdown to prevent engine damage. This standby generator set also has a high temperature shutdown, LED display, and a built-in battery charger.
26kW Standby Generator 40679 Ratings
Use Rating | Standby Only—Utility Grid Must Connected |
Voltage | 120/240 Volts Single Phase |
Running Watts | 26kW LP Propane / 24kW Natural Gas |
Running Amps | 108.3 Amps LP Propane / 100 Amps Natural Gas |
Main Circuit Breaker | 125 |
Normal Operating Sound | 65 dBA Normal Operation / 63 dBA Low Idle Mode |
Frequency Regulation | ±1.0 Percent |
Engine Speed | 3600 RPM |
26kW Briggs and Stratton Generator 400 Amp Split Service Transfer Switch
The 26kW Briggs and Stratton Generator restores power to your home during utility outages. Fully automatic, it works in any weather including hurricanes, Whether you’re at home, away on vacation, or sleeping in your bed, the 26kW generator senses a power outage.
Power Management
The New Briggs and Stratton Generator and Automatic Transfer Switch systems include an Amplify 200-Amp Service Rated Transfer Switch and Amplify Gateway Module.
With Amplify power management, the homeowner can control up to 32 prioritized appliances via the Standby Generator Management App. The Amplify system requires the Gateway, Dual Low Voltage Modules, and High Voltage Modules.
Low voltage modules manage appliances with controls like a thermostat—Air Conditioners, Furnaces, and Heat Pumps. High voltage appliances like electric ranges, water heaters, and electric dryers use the high voltage modules.
Briggs and Stratton Generators are compatible with Symphony II power management. Symphony II controls up to eight circuits with low voltage modules, dual low voltage modules, and 50-amp modules. Priority is set during installation.
This Briggs & Stratton 26kW Standby Generator is NOT rated for Prime Power Applications.
* Battery Not included—12 Volt, Group BCI 26 or 51, 540 Cold Cranking Amps